2500-4
Stump Grinder

Up Close

This Model has been superceeded by the SP4012 Series

Left front view. Scraper blade is installed on the front. This is removed for grinding, but is useful for clearing away chips.

Various views of the 2500-4
stump grinder.

On the view to the right you can see the hydraulic controls.

This view is to show you the thickness of the stump cutting wheel and the size of the heavy duty bearings on the 2500-4.

21" diameter, 1" thick,
with 20 teeth on.

The scraper blade would be removed for grinding.
It lifts right off easily.

Closer look at the
Kohler Command 27 HP engine.

Carlton recently switched from a 25 HP engine, at no extra cost,
so now you get even more
power to grind those stumps.

Operator's view.

Here you control your machine with the push of a few levers.

No more pushing a handlebar
back and forth, up and down.

Controls include:

forwards/reverse
left/right steering
left/right
up/down
extend forwards/back

This little gage shows the safe operating angles for the stump grinder.

It is just below the engine to the right of the operator controls

Rear view. The wheels extend hydraulically on a tongue for forwards/backwards reach.

This stump grinder has a width of 35 inches, allowing it to fit easily through standard backyard gates.